OEM/ODM Services
BXHS Hydraulic offers OEM/ODM services for customers who require customized hydraulic products with their own branding. Our OEM/ODM process can be summarized as follows:
1. Customer Requirements: The customer provides us with their specific requirements, including product design, specifications, quantities, and branding details.
2. Design and Development: Our experienced engineering team will then work on designing and developing a prototype based on the customer's requirements and branding details.
3. Prototype Approval: Once the prototype is complete, we will send it to the customer for approval. If any modifications are required, we will work with the customer to make the necessary changes.
4. Branding and Production: After the prototype is approved, we will start the mass production process with the customer's branding details incorporated into the products.
5. Quality Control: During the production process, we have a strict quality control system to ensure that every product meets our high standards and the customer's branding requirements.
6. Delivery: After the production process is complete, we will deliver the branded products to the customer.
At BXHS Hydraulic, we take pride in our OEM/ODM services and strive to provide high-quality hydraulic products that meet our customers' specific requirements and branding needs. If you're looking for OEM/ODM manufacturer in the hydraulic products industry, please contact us to learn more about how we can assist you with your hydraulic system needs. With our extensive industry experience and expertise, we can provide you with high-quality hydraulic products and services. Feel free to reach out to us to find out more.
Main Products
CBGJ Series Gear Pump
In stock
Displacement |
32 cc/rev, 40 cc/rev, 45 cc/rev, 50 cc/rev, 63 cc/rev, 80 cc/rev, 100 cc/rev, 125 cc/rev, 140 cc/rev, 160 cc/rev |
---|---|
Flange Version |
A-Oval Flange, B-Square Flange |
Shaft Type |
H: Rectangle Spline, X: Involute Spline |
Port Position |
1: side in side out |
Rotation |
L: Left (counter-clockwise), R: Right (clockwise) |
LVA1-95 Log Splitter Valve
In stock
Control Method |
manual |
---|---|
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
90 L/min (23.8 GPM) |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
315 bar (31.5 MPa) |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Valve Structure |
Sectional Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
Only one sections |
Rustproof Level |
Neutral salt spray test, 48hours |
Kick out set pressure |
70-140 bar (1015-2030 psi) |
HSDS25 Hydraulic Directional Control Valve
In stock
Control Method |
hydraulic |
---|---|
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
240 L/min (63 gpm) |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
250 bar (25 MPa) |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Valve Structure |
Sectional Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
1-12 Sections |
Rustproof Level |
Neutral salt spray test, 48hours |
CBHST1 SK UNI Gear Pump
In stock
Model code |
CBHST1-SK |
---|---|
Displacement |
63 cc/rev, 80 cc/rev |
Mounting |
B: Square flange |
Joining port |
L: Screw |
Shaft Type |
H: Rectangle Spline |
Rotation |
L: Left (counter-clockwise) , R: Right (clockwise) |
Port Position |
1: side in side out , 2: side in bottom out , 3: bottom in bottom out , 4: bottom in side out |
CBG Series Gear Pump
In stock
Displacement |
32 cc/rev, 40 cc/rev, 45 cc/rev, 50 cc/rev, 63 cc/rev, 80 cc/rev, 100 cc/rev, 125 cc/rev, 140 cc/rev, 160 cc/rev |
---|---|
Flange Version |
A-Oval Flange, B-Square Flange |
Shaft Type |
H: Rectangle Spline, X: Involute Spline, P: Plain Key |
Port Position |
1: side in side out |
Rotation |
L: Left (counter-clockwise), R: Right (clockwise) |
P80 Directional Control Valve
In stock
Model No. |
P80 Series Hydraulic Valve |
---|---|
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
80 L/min (21 gpm) |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
Maximum 250 bar at P Port |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Spool Stroke |
±6mm |
Valve Structure |
Monoblock Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
1-7 sections |
Rustproof Level |
Neutral salt spray test, 48hours |
DCV60 Electro-pneumatic Directional Control Valve
In stock
Control Method |
electro-pneumatic |
---|---|
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
60 L/min |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
350 bar (35 MPa) |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Valve Structure |
Sectional Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
1-12 Sections |
Rustproof Level |
Neutral salt spray test, 48hours |
HSSD5 Manual Directional Control Valve
In stock
Control Method |
manual |
---|---|
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
45 L/min (12 gpm) |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
250 bar (25 MPa) |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Valve Structure |
Monoblock Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
1-7 sections |
Rustproof Level |
Neutral salt spray test, 48hours |
P40 Pneumatic Directional Control Valve
In stock
Control Method |
pneumatic |
---|---|
Model No. |
P40 Series Hydraulic Valve |
Presure Medium |
Mineral oil based hydraulic oil |
Nominal Flow |
40 L/min (10.5 gpm) |
Viscosity Range |
12 CST-400 CST |
Operating Pressure |
Maximum 250 bar at P Port |
Internal Leakage |
15 cc/min at 160 bar, 50℃ |
Ambient Temp |
-40°C to +80°C (-40°F to +176°F) |
Spool Stroke |
±6mm |
Valve Structure |
Monoblock Valve |
Valve Surface |
Phosphating treating |
Valve Sections |
1-7 sections |
Rustproof Level |
Neutral salt spray test, 48hours |